Viking BLK 3 EWP Strobe Light Indication of Line Status

Features:

• LDB-3 control module with Enhanced Weather Protection (EWP) included
• Polycarbonate lens
• Strobe and control module may be installed separately
• Long life 1 million candle power blue strobe light
• Flush mount or B mount with weatherproof single gang box (included)
• 3/4" knockouts for connecting conduit, etc.
• Can be configured to signal ringing off-hook or a combination of both ringing and off-hook (line in-use)
• One set of (NO) normally open and (NC) normally closed relay contacts provided
• Selectable ring cadence mode (strobe light will remain flashing between rings)
• Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
• On/off switches for ring detection and off-hook/loop detection
• Disable input, ideal for use with two-button emergency phones (E-1600-20A), will not activate strobe light on "Info" calls
• Made in the USA

Specifications:

• Power: 120V AC to 12V DC adapter provided
• Strobe Dimensions: 111mm diameter x 69mm (4.38" x 2.75")
• Control Module Dimensions: 74mm x 53mm x 25mm (2.9" x 2.1" x 1.0")
• Operating Temperature: -26° to 54°C (-15° to 130° F)
• Relay Contact Rating: .5A @ 125V AC/1A @ 30V DC
• Minimum Loop Current: 15 mA
• Minimum Ring Voltage: 25V RMS
• Strobe Output: 1 million candle power @ 1 second flash rate
• Ringer Equivalence: 0.5 A REN
• Disable/Info Switch Input: 50mA/80mW maximum
• Mounting: Fasten to wall, post, etc. with complete surface mounting hardware included
• Connections: Color coded wires with gel-filled butt connectors

Part Number: BLK-3-EWP

Viking BLK-3-EWP Line Status Strobe

Provide Strobe Light Indication of Line Status

The BLK-3-EWP provides high visibility indication of analog line status through a high powered one million candle power strobe light. The BLK-3-EWP is the ideal solution for the hearing impaired and can be used equally well in loud warehouses or factories, where ringing phones can not be heard. Alternatively, the BLK-3-EWP can be used to add emergency notification to pre-existing emergency phones by turning on the strobe light when the emergency phone is in use.

The included LDB-3 control module has a disable input which is ideal for two-button emergency phones, such as Viking’s E-1600-20A, allowing "Info" button calls to be placed without activating the relay (turning on the emergency strobe light, camera, etc.) Three DIP switches are provided for turning ring detection on or off, off-hook/loop detection on or off and for selecting a ring cadence mode which allows the relay to follow ringing or to remain activated during the off time of standard ring cadence.

The control module can be installed on any standard telephone line or analog PABX/KSU station. The 1 million candle power strobe can be interfaced to flash on ringing, off-hook or a combination of ringing and off-hook (line in-use). The LDB-3 ring/loop detect control module is also available separately.

The kit includes: (1) LDB-3 control module, (1) blue strobe light, (1) 12V DC power adapter, (13) gel filled butt connectors and (1) single gang weatherproof mounting box with gaskets and hardware.

Viking BLK-3-EWP Strobe Light Kit with EWP Technical Information