Speaker E10A-EWP

• Alternate action call button to place or cancel a call
• Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
• Telephone line powered
• Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
• Enhanced Weather Protection (EWP) available for greater weather resistance
• Adjustable microphone and speaker volume
• Programmable maximum call length
• Selectable auto-answer feature allows remote monitoring
• Two way handsfree communication
• Programmable VOX (mic/speaker) switching speed
• E-10A/E-10A-EWP Features:
• Vandal resistant, black powder painted, aluminum face plate with heavy duty metal call button and mounting gasket
• Flush mountable using included plastic rough-in box part # 259576
• Surface mountable with an optional VE-5x5
• E-20B/E-20B-EWP Features:
• Light gray colored, impact resistant, U.V. stable, plastic chassis
• Surface mountable only
• Power: Telephone line powered (18 VDC/20mA minimum)
• E-10A Dimensions: Overall: 127mm x 127mm x 57.2mm (5” x 5” x 2.25”), Rough-in box: 102mm x 102mm x 57mm (4” x 4” x 2.25”) E-20B Dimensions: 140mm x 115mm x 38mm (5.5” x 4.5” x 1.5”)
• Standard E-10A/E-20B Environment: -26 C to 54 C (-15 F to 130 F) with 5% to 95% non-condensing humidity
• E-10A/E-20B-EWP Environment: -26 C to 54 C (-15 F to 130 F) with up to 100% condensing humidity
• Speaker Volume: Approximately 70db maximum @ 1m
• Ring Voltage: 25V AC RMS minimum
• CPC Disconnect Time: 300ms minimum
• REN: 0.8A
• Standard Connections: (1) 2-position terminal block
• EWP Connections: (2) gel-filled butt connectors

Part Number:E10A-EWP

Speaker E-10A-EWP

The E-10A and E-20B are telephone line powered speaker phones designed to provide twoway handsfree communication. Both function identically, but are available in two different housings to better suit the application. When the “Call” button is pressed, the E-10A or E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.

The E-10A/20B can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ringdown circuit, or used with a Viking Hot-Line Dialer. If a line or station is not available, Viking’s DLE-200B ring down circuit can be used. One, or up to four, E-10A/20B speaker phones can share an existing phone line in a house or small business when used with a Viking C-200 or C-2000A (respectively) Entry Phone Controllers.

For outdoor or harsh environments, the E-10A/20B are available with Enhanced Weather Protection (EWP). The E-10A-EWP and E-20B-EWP feature rubber gaskets and boots, closed cell foam gasketing, silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches.

Viking E-10A-EWP Ehanced Weather Protection Speaker Phone Technical Information