Speaker E10A

• Alternate action call button to place or cancel a call
• Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
• Telephone line powered
• Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB
• Optional Enhanced Weather Protection (EWP) available for greater weather resistance
• Adjustable microphone and speaker volume
• Programmable maximum call length
• Selectable auto-answer feature allows remote monitoring
• Two way handsfree communication
• Programmable VOX (mic/speaker) switching speed
• Viking E-10A/E-10A-EWP Features:
• Vandal resistant, black powder painted, aluminum face plate with heavy duty metal call button and mounting gasket
• Flush mountable using included plastic rough-in box part # 259576
• Surface mountable with an optional VE-5x5
• Power: Telephone line powered (18 VDC/20mA minimum)
• E-10 Dimensions: Overall: 127mm x 127mm x 57.2mm (5” x 5” x 2.25”), Rough-in box: 102mm x 102mm x 57mm (4” x 4” x 2.25”) E-20A Dimensions: 140mm x 115mm x 38mm (5.5” x 4.5” x 1.5”)
• Standard Viking E-10A/E-20A Environment: -26 C to 54 C (-15 F to 130 F) with 5% to 95% non-condensing humidity
• E-10/E-20A-EWP Environment: -26 C to 54 C (-15 F to 130 F) with up to 100% condensing humidity
• Speaker Volume: Approximately 70db maximum @ 1m
• Ring Voltage: 25V AC RMS minimum
• CPC Disconnect Time: 300ms minimum
• REN: 0.8A
• Standard Connections: (1) 2-position terminal block
• EWP Connections: (2) gel-filled butt connectors

Part Number: E-10A

Speaker E-10A

The Viking E-10A and E-20B are telephone line powered speaker phones designed to provide two-way handsfree communication. Both function identically, but are available in two different housings to better suit the application. When the “Call” button is pressed, the Viking E-10A or E-20B will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect.

The Viking E-10A/20B can be connected directly to a C.O. line or analog PABX/KSU station when programmed as a ringdown circuit, or used with a Viking Hot-Line Dialer. If a line or station is not available, Viking’s DLE-200B ring down circuit can be used. One, or up to four, Viking E-10A/20B speaker phones can share an existing phone line in a house or small business when used with a Viking C-200 or C-2000A (respectively) Entry Phone Controllers. For outdoor or harsh environments, the Viking E-10A/20B are available with Enhanced Weather Protection (EWP).

The Viking E-10A-EWP and E-20B-EWP feature rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as well as urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches

Viking E-10A Speaker Phone Technical Information