|
|
Home  Viking electronics Emergency|Elevator Phones Viking E-1600A-BLT2-EWP Emergency Tower Phone (E-1600A-BLT2-EWP) | Viking E-1600A-BLT2-EWP Emergency Tower Phone (E-1600A-BLT2-EWP) | E1600ABLT2EWP Compliant Emergency
Features:
- Enhanced Weather Protection (EWP)
- Meets ADA requirements for Emergency Phones:
- Can automatically light the “Call Connected” LED for the hearing impaired
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
- 16 second non-volatile digital voice announcer
- 1 million candle power blue strobe light
- Advanced call progress detection
- Handsfree operation
- Phone line powered emergency phone (strobe requires power)
- Non-volatile memory (no batteries required)
- Touch Tone or pulse dialing
- Dials up to 5 emergency numbers
- Cycles through backup emergency and non-emergency numbers on busy or no-answer
- E-1600A-BLT2-EWP can also dial up to 3 non-emergency “Info” numbers
- Hangs up on CPC, silence, busy signal, dial tone, time-out or Touch Tone command
- Programmable to auto-answer on incoming calls
- Remotely programmable
- Extended temperature range (-15F to 130F)
- Central Station Monitoring capability (dials 2 numbers)
- Separate central station voice speed dial number
- Optional PB-100 Polling System available
- High visibility, vandal and weather resistant
- Vandal resistant polycarbonate strobe lens
- Surface mountable
Specifications:
- Phone Power: Telephone line powered. Minimum 24V DC talk battery voltage, with a minimum loop current of 20mA loop (room temp), or 25mA (extended cold temp range). Loop current may be boosted on low current lines with a Viking Model TBB-1 talk battery booster (Fax Back # 630).
- Strobe Power: 120V AC/12V DC power adapter (included)
- Maximum Strobe Power Run: 200 feet using 24 awg wire
- Dimensions: 1070mm x 152.4mm x 109.3mm (42” x 6” x 4.5”)
- Mounting: Surface mount to rigid wall or post
- Environmental: -26C to 54C (-15F to 130F) with 5% to 95% non-condensing humidity
- Strobe Output: 1,000,000 candle power
- Material: Enclosure - .125 aluminum, 76.2mm x 152.4mm (3” x 6”) tube, powder painted high-visible yellow, Phone - .074 (14 gauge) stainless steel with stainless steel button, Strobe - Vandal resistant polycarbonate plastic
- Connections: Color-coded wires with gel-filled butt connectors
Part Number: E-1600A-BLT2EWP
E-1600A-BLT2EWP Compliant Emergency
Many new building codes require emergency communication in elevators and “Area of Refuge” sites. Now you can provide added safety for your patrons, employees, and students with the addition of high visibility, ADA Compliant emergency communication.
At the simple push of a button, the E-1600A-BLT-EWP will initiate a call to your emergency personnel and send a digital announcement to identify the location of the emergency call. In addition, the tower phone’s bright (1million candle power) strobe light will instantly begin flashing to deter further activity and make it fast and easy for Police or Security personnel to locate the site of the emergency.
Though the strobe requires external power to operate, rest assured that communication is possible, even during power failures! All phone numbers, location numbers and programming parameters are stored in non-volatile memory. No batteries are required to hold the memory.
The E-1600A-BLT-EWP and E-1600A-BLT2-EWP are equipped for outdoor or harsh environments with Enhanced Weather Protection (EWP). EWP features rubber gaskets and boots, hand soldered silicon sealed connections, gel filled butt connectors, as well as urethane potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming.
|
|
|
|  |
|
|
View Cart
