|
|
Home  Viking electronics Enhanced Weather Protection Viking E-30-PT Speaker Phone (E-30-PT) | Viking E-30-PT Speaker Phone (E-30-PT) | Speaker E30PT
Features:
- Push to talk button
- Phone line powered
- Vandal resistant, stainless steel faceplate with heavy-duty metal call button
- Non-volatile E2 memory (no batteries required)
- Touch Tone or pulse dialing
- Programmable to dial up to 5 numbers on busy or ring no answer
- Red off-hook LED indicator
- Hangs up on CPC, silence, busy signal, return to dial tone, time out or a Touch Tone command
- Programmable to auto-answer on incoming calls
- Remotely programmable
- Extended temperature range (-15F to 130F)
- E-30-PT-EWP has Enhanced Weather protection
- Flush mountable using included plastic rough-in box
- Optional VE-5x5 surface mount back box
- E-30-PT-EWP conforms to NEMA requirements
Specifications:
- Power: Telephone line powered (24VDC talk battery w/20mA loop current minimum)
- Minimum Ring Voltage: 90VAC RMS
- Dimensions: Overall-127mm x 127mm x 57mm (5 x 5 x 2.25), Plastic Electrical Box-102mm x 102mm x 54mm (4 x 4 x 2.12)
- Operating Temperature: -26C to 54C (-15F to 130F) Humidity - E-30-PT: 5% to 95% non-condensing Humidity - E-30-PT-EWP: Up to 100% condensing
- Connections - E-30-PT: RJ11 jack
- Connections - E-30-PT-EWP: Gel-filled butt connectors
Part Number: E-30-PT
Speaker E-30-PT
The E-30-PT is designed to provide quick and reliable communication in noisier areas. The mic sensitivity is set to a low level until the TALK button is pressed then it is raised to a normal level. In this way, the E-30-PT assures that the called partys voice will be broadcast over the speaker. In applications where the background noise can be louder than the person calling, a handset type phone is recommended.
The E-30-PT features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-30-PT can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered.
The E-30-PT-EWP shares all of the features of the E-30-PT in addition to Enhanced Weather Protection (EWP) for installation in harsh environments. EWP products feature rubber gaskets and boots, hand soldered silicon sealed connections, gel-filled butt connectors, as well as urethane potted circuit boards with weather sealed, field-adjustable trim pots and DIP switches for easy on-site programming
|
|
|
|  |
|
|
View Cart
