Speaker E60SS

Features:

• Compact size: Front panel is the size of a typical double gang mid- size wall plate
• Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.7” wide x 2.84” tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD# 424)
• Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
• PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
• Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-60-SS Stainless Steel faceplate)
• Optional Enhanced Weather Protection (EWP) available
• Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
• Blue LED helps locate the push button, indicate ringing and off-hook
• Telephone line powered
• Microphone and speaker volume controls
• Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
• Selectable auto answer feature for monitoring
• Programmable VOX (mic/speaker) switching speed

Specifications:

• Power: Telephone line powered. Minimum 18V DC talk battery voltage with a minimum loop current of 20MA. Loop current may be boosted on low current lines with a Viking model TBB-1A Talk Battery Booster (see Fax Back Document 630).
• Dimensions: Faceplate: 123.8mm x 125.4mm x 4.3mm (4.875” x 4.938” x 0.17”), Phone: 72mm x 46mm x 42mm (2.84” x 1.8” x 1.65”)
• Operating Temperature: -34 C to 65 C (-30 F to 150 F)
• Humidity: Standard model: 5% to 95% non-condensing humidity, EWP model: up to 100% humidity
• Speaker Volume: Approximately 62db maximum @ 1m
• Ring Voltage: 25V AC RMS minimum (for auto answer)
• CPC Disconnect Time: 300ms minimum
• REN: 0.8A
• Connections: (2) gel-filled butt connectors

Part Number: E-60-SS

Speaker E-60-SS

The E-60 Series entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E-60 compact size allows it to be mounted in a standard double gang electrical box.

The E-60 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-60 faceplates (PNL60) can be purchased separately and are available in all five standard finishes. The E-60 blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring.

The E-60 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200 or C-2000A Entry Phone controller. The E-60 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer.

The E-60 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For extreme outdoor environments or corrosive atmospheres, the E-60 Series is available with Enhanced Weather Protection (EWP).

Viking E-60 Series Double Gang Entry Phones with LED Tech. Info.

Integrate Viking video entry