Viking K1900-5 Viking K-1900-5 Hot-Line Dialer

• Touch Tone programmable
• Telephone line powered
• Non-volatile E2 memory (no batteries required)
• Ring detection (won’t dial on inbound calls)
• User programmable security code
• Programmable pauses in one and four second increments
• Programmable to interrupt user
• Touch Tone dialing to help control fraudulent calls from hand held dialers, etc.
• Programmable dialing speed (normal or fast)
• Can be configured to operate from a contact closure (Fax Back Document 818)
• Power: Telephone Line Powered (24V DC 20 mA minimum).
• Dimensions: 73.7mm x 53.3 mm x 25.4 mm (2.9" x 2.1" x 1.0")
• Connection: (1) RJ11 plug, (1) RJ11 jack
• Part Number: K-1900-5

Viking K-1900-5 Viking K-1900-5 Hot-Line Dialer

Replace Dedicated Phone Lines with a Touch Tone Hot-Line Dialer. Why pay the premium of leased or dedicated phone lines?

The K-1900-5 will automatically dial a preprogrammed number, of up to 32 digits, whenever an associated telephone is taken off hook. Using nonvolatile E2 memory, the K-1900-5 is telephone line powered and will operate on any loop start central office line or analog PABX/KSU extension.

The K-1900-5 is easily programmed remotely or locally using a standard Touch Tone phone.

NOTE: This product does not eliminate the possibility of toll fraud! To further protect against fraudulent calls, use with a TR-1 Toll Restrictor (Fax Back Document 705).

Viking K-1900-5 Hot Line Touch Tone Dialer Technical Information