Viking K1900-8-EWP Hot-Line Phone

• Auto dials 1 (up to 32 digits) programmable speed dial number
• Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
• Touch Tone or pulse dialing
• Touch Tone keypad
• Non-volatile E2 memory (no batteries required)
• Operates on analog PABX and key system extensions or analog Centrex and C.O. lines
• Ring detection (won’t dial on incoming calls)
• Programmable 6 digit security code
• Touch Tone programmable
• Vandal resistant, heavy gauge, stainless steel panel; armored cable, metal cradle and metal keypad
• Programmable pre-dial pause
• Blocks fraudulent calls from hand held pocket dialers
• Limited toll restriction in dumb phone mode
• Hearing aid compatible amplified handset with rotary volume control
• Power: Telephone line powered (20V DC/18mA minimum)
• Dimensions: Overall - 127mm x 254mm x 102mm (5” x 10” x 4”)
• Panel Material: .125 inch thick stainless steel
• Handset Cable Length: 864mm (34”)
• Mounting: Flush mounted
• Dial Speed: Touch Tone - Normal = 120ms on/off, Fast = 50ms on/off; Pulse - Normal = 10 pps, Fast = 20 pps
• Connections: (1) RJ11 jack
• Part Number: K-1900-8-EWP

Viking K-1900-8-EWP Hot-Line Phone

Attractive, Vandal Resistant, Hot-Line Phone with Built-in Keypad. The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle.

The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile E2 memory.

Viking K-1900-8 / K-1900-8-EWP Hot Line Panel Phones w/keypad Technical Information