Viking K6000-DVA Voice Message Delivery System


Features

• Non-volatile memory (no batteries required)
• Stores up to 1000 14-digit numbers
• Up to 6 groups
• 8 minutes of total record time total
• Eight normally open inputs for push buttons to activate groups 1-6, “All Call” or “Stop”
• Programmable ring delay for remote programming
• Call progress detection determins when answered
• Programmable ringback limit for call progress (1-8)
• Programmable “retry” limit (1-9) for calls that are busy or don’t answer
• Remote security and access codes
• Local or remote programming and recording
• Program from your PC’s USB or RS-232 port (RS-232 to USB adapter included)
• Up to 8 K-6000-DVAs can be connected to 1 PC
• Master/Slave mode for multiple levels of K-6000-DVAs
• Compatible with the RC-2A and RC-3 remote DTMF controllers
• Line level input for loading pre-recorded messages into the unit
• Activity reports available

Specifications

• Power: 120V AC/12V DC 500 mA, UL listed adapter provided
• Dimensions: 211mm x 160mm x 46mm (8.3” x 6.3” x 1.8”)
• Environmental: 0 C to 32C (32 F to 90 F) with 5% to 95% noncondensing humidity
• Talk Battery: 12V DC
• Touch Tone Dialing: 120 ms on/off, 50 ms on/off
• CPC Detection Time: 320 ms minimum
• Message Record Time: 8 minutes
• Sampling Rate: 64 K (equivalent)
• Input Detection Time: 80 ms
• Connections: (1) RJ11 jack for telco connection, (2) 3.5mm jacks for 600-ohm audio output and record in, (1) 9 pin RS-232 for PC connection, (1) 12 position screw terminal block for inputs

Viking K-6000-DVA Voice Message Delivery System

Model K-6000-DVA can automatically notify up to 1000 people of an event or an event cancellation, school or business closing or delayed opening. The K-6000-DVA is designed to connect to a standard analog CO line, PABX station or VoIP ATA or FXS port. To activate the unit, an authorized official calls the K-6000-DVA, dials a 6 digit access code, selects a pre-recorded message or records a live message up to 1 minute, then activates the unit via a touch tone command to automatically call all the phone numbers in a pre-programmed group. Up to 6 groups of phone numbers can be pre-programmed into the unit. Alternatively, activating an “All Call” command calls all pre-programmed numbers.

The K-6000-DVA can also be activated (or cancelled) by up to 8 external momentary push buttons (not included). In the event any called number is busy or doesn’t answer, the unit will retry the unanswered numbers several times (programmable 1-9) after all other numbers are called. The maximum number of rings before calling the next number is programmable 1-8 rings (6-48 seconds). The unit waits 2 seconds for touch tones after the message is delivered, if a * is detected, the message is replayed once. For critical applications, the K-6000-DVA can be programmed to require a positive confirmation - the called party must send a pre-determined touch tone to confirm that the message was received. The K-6000-DVA can be programmed from your PC’s USB or RS-232 port.

Viking K-6000-DVA Automated Voice Message Delivery System Technical Information