Multi-Tone Generator RC 2A


Features

• Programmable access code
• Normally open or normally closed relay
• Selectable relay closure times
• Selectable ring delay (1, 2, 6, or 15)
• Easy installation with modular jacks and screw terminals
• Automatic disconnect or return to secure mode after 60 seconds
• Made in the USA

Specifications

• Power: 120VAC / 12VDC 500mA UL listed adapter provided
• Dimensions: 133mm x 89mm x 44mm (5.25" x 3.5" x 1.75")
• Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% non-condensing humidity
• Relay Contact Ratings: .5A @ 125V AC/1A @ 30V DC
• Connections: (2) RJ-11 jacks and 3 pin screw terminal block

Multi-Tone Generator RC-2A

The RC-2A Remote Controller provides remote relay operation from any standard Touch Tone telephone.
The controller is designed to be installed either locally or remotely. For local installations the RC-2A can be installed in series on any analog communications path, such as analog C.O. lines, analog PABX/KSU stations or Viking’s W-Series Doorboxes. and will passively monitor for Touch Tone commands.
For off-premise applications, the RC-2A will answer analog C.O. lines or PABX/KSU stations after a selectable ring delay. A field programmable access code can also be programmed to prevent unauthorized usage. The RC-2A will then allow remote relay operation. Note: For applications where more than one relay closure is required, the RC-3 is available

Viking RC-2A Remote Touch Tone Controller Technical Information